Proxim AP-2000 Podręcznik Użytkownika Pobierz pdf (Strona 145)

145

Using the Command Line Interface (CLI)

[Device-Name]>set snmpv3privpasswd <New Password> (SNMPv3 privacy password)

[Device-Name]>reboot 0

CAUTION

Proxim strongly urges you to change the default passwords to restrict access to your network devices to

authorized personnel. If you lose or forget your password settings, you can always perform the Reset to

Factory Default Procedure.

Set Network Names for the Wireless Interface

[Device-Name]>set wif <index 3 (Slot A) or 4 (Slot B)> netname <Network Name (SSID) for

wireless interface>

[Device-Name]>show wif

Figure A-13 Results of “show wif” CLI command for an AP

Enable and Configure TX Power Control for the Wireless Interface(s)

The TX Power Control feature lets the user configure the transmit power level of the card in the AP at one of four

levels:

• 100% of the maximum transmit power level of the card

• 50%

• 25%

• 12.5%

Perform the following commands to enable TX Power Control and set the transmit power level:

[Device-Name]>set txpowercontrol enable

[Device-Name]>set wif <interface number> currenttxpowerlevel <value>

Allowed values are: 1 (100%), 2 (50%), 3 (25%), 4 (12.5%)

Configure SSID (Network Name) and VLAN Pairs, and Profiles

Perform the following command to configure an SSID/VLAN pair, and to assign a Security Profile and RADIUS Profiles

to it.

[Device-Name]>set wifssidtbl <Index.subindex> ssid <Network Name> vlanid <-1 to 1094>

ssidauth <enable/disable> acctstatus <enable/disable> secprofile <Security Profile

Nmuber> radmacprofile <MAC Authentication Profile Name> radeapprofile <EAP

Authentication Profile Name> radacctprofile <Accounting Profile Name> radmacauthstatus

<enable/disable> aclstatus <enable/disable> denynonencrypted <enable/disable>

1 2 ... 140 141 142 143 144 145 146 147 148 149 150 ... 243 244

Brak uwag

Proxim AP-2000 Podręcznik Użytkownika Strona 145