Proxim ORiNOCO AP-8000 Podręcznik Użytkownika Strona 39
- Strona / 169
- Spis treści
- ROZWIĄZYWANIE PROBLEMÓW
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
Access Point Features AP-8000 User Guide
Configuring the Device
39
Configuring Security Profiles
Security policies can be configured and applied on the AP as a whole, or on a per SSID basis. You can configure a
security profile for each VLAN.
The user defines a security policy by specifying one or more values for the following parameters:
• Wireless STA types (WPA station, 802.11i (WPA2) station, WPA-PSK, and 802.11i-PSK) that can associate to the AP.
• Authentication mechanisms (802.1x) that are used to authenticate clients for each type of station.
• Cipher Suites (AES, TKIP, WEP, None) used for encapsulating the wireless data for each type of station.
NOTE: If you select WEP or TKIP, then the device will work on legacy rates not on 11n rates.
AP-8000 supports up to 8 security profiles and can be mapped to any of the VAPs.
Wireless Security Features
• Profile Name: This parameter represents the name of the security profile name.
• Authentication Mode: This parameter is used to configure the security authentication mode for wireless.
• WEP Key: This parameter is used to configure the Wep key for wireless security.
• Encryption Type: This parameter is used to configure the type of encryption for the wireless security.
• PSK: This is the read parameter and used to display the security key in asterisk.
• Rekeying Interval: This parameter represents the time interval within which the number of times the key is changed.
NOTE: Rekeying Interval in case of Dynamic WEP is WEP Rekeying Interval, whereas in the case of WPA Security
Modes is WPA Group Rekeying Interval.
RADIUS
Configuring Radius Profiles on the AP allows the administrator to define a profile for RADIUS Servers used by the system
or by a VLAN.
The network administrator can configure default RADIUS authentication servers to be used on a system-wide basis, or in
networks with VLANs enabled the administrator can also configure separate authentication servers to be used for MAC
authentication, 802.1x authentication, or RADIUS based accounting. If the back-up server are configured, then the AP
will communicate with the back-up server till the primary server is offline.
The AP communicates with the RADIUS server defined in a profile to provide the following features:
MAC Access Control Via RADIUS Authentication
If you want to control wireless access to the network and if your network includes a RADIUS Server, you can store the list
of MAC addresses on the RADIUS server rather than configure each AP individually. you can define a RADIUS profile
that specifies the IP Address of the server that contains a central list of MAC Address values identifying the authorized
stations that may access the wireless network. You must specify information for the least primary RADIUS server. The
back-up server is optional.
NOTE: Each VLAN can be configured to use a separate RADIUS server (and backup server) for MAC authentication.
MAC access control can be separately enabled for each VLAN.
802.1x Authentication using RADIUS
You must configure a primary EAP/802.1x Authentication server to use 802.1x security. A back-up server is optional.
NOTE: Each VLAN can be configured to use a separate RADIUS server (and back-up server) for 802.1x authentication.
802.1x authentication (“EAP authentication”) can be separately enabled for each VLAN.
- ORiNOCO AP-8000 1
- Copyright 2
- Trademarks 2
- GPL License Note 2
- OpenSSL License Note 2
- Introduction 8
- Quality of Service (QoS) 9
- Software Upgrade 9
- Hardware Overview 10
- Prerequisites 12
- System Requirements 13
- Product Package 13
- Optional Accessories 14
- Hardware Installation 14
- Using a Console Port 15
- Install the Antenna 15
- Mount the Unit 15
- Power on the Unit 16
- Initialization 18
- Installing the Software 22
- Managing the Access Point 27
- SNMP Management 28
- SSH (Secure Shell) Management 28
- HyperTerminal 28
- ProximVision ES 29
- Password Management 31
- 7. Click COMMIT 33
- Access Point Features 34
- Ethernet 36
- Security 36
- IP Configuration 43
- TPID Priority CFI VID 45
- Managing the Device 48
- Upgrading the Firmware 49
- Monitoring the Device 51
- Interface Statistics 52
- Network Layer 54
- Web Interface Overview 56
- Error Message 56
- Configuring the Device 57
- Wireless 58
- Filtering 73
- Management Access Control 88
- System Log 91
- Event Log 93
- Pre-requisites 102
- Viewing the MIB Objects 102
- Configuring the MIB Objects 103
- General Notes on CLI 105
- Navigation and Special Keys 106
- Messages 106
- List Commands 107
- Command Line Completion 107
- Rules for Table Objects 107
- User Execution Mode 108
- Privileged Mode 108
- Log into the AP using Telnet 109
- Device Configuration 111
- // RUNNING-CONFIGURATION // 127
- TFTP Configuration 133
- Telnet configuration 133
- HTTP Configuration 133
- Country Code Configuration 136
- Inventory management 136
- Event Log Configuration 137
- SNTP Configuration 138
- // INTERFACE STATISTICS // 139
- Display the ICMP Statistics 141
- Display the IPARP Statistics 141
- Troubleshooting 144
- Symptoms and Solutions 145
- Client Connection Problems 147
- VLAN Operation Issues 147
- Gigabit Ethernet PoE 148
- Recovery Procedures 149
- Related Applications 153
- ASCII Character Chart 154
- Bootloader CLI 155
- Specifications 157
- Advanced Bridging Functions 158
- Security Features 158
- Hardware Specifications 159
- Available Channels 160
- Support Options 166
- Statement of Warranty 168
- Other Information 169
Powiązane produkty i podręczniki dla Networking Proxim ORiNOCO AP-8000
Networking Proxim AP-2000 Podręcznik Użytkownika
(244 strony)
(244 strony)
Networking Proxim 7910 Podręcznik Użytkownika
(127 strony)
(127 strony)
Networking Proxim RangeLAN2 7921 Dokumentacja
(76 strony)
(76 strony)
(9 strony)Electrolux Combi-frigo manuels d'utilisation
À partir de S
Komentarze do niniejszej Instrukcji