Proxim ORiNOCO Przewodnik Instalacji Pobierz pdf (Strona 17)

Device Initialization

ORiNOCO® 802.11n Access Points - Software Management Guide 17

7. Click Select Adapter, to change the adapter settings.

8. Locate the MAC address of the device you want to initialize from the Scan List and click Web Config to logon to the

Web Interface. See Logging onto the Web Interface

• If device does not appear in the Scan List, click Rescan in the Scan List to update. If the device still does not appear in the

list, see Troubleshooting.

• Note that after rebooting the device, it may take up to five minutes for the device to appear in the Scan List.

3.1.3 Modifying the IP Address

The IP address assigned to the device can be obtained and, if required, can be changed to the IP address that is appropriate

on the network. The ScanTool automatically detects the devices installed on the network segment, regardless of the IP

address, and enables the configuration of each device’s IP settings

By using ScanTool, you can change the IP address of the device as explained below:

1. Select the device details from the Scan List and click Change. A Change screen appears as shown in the following

figure.

Figure 3-2 Modifying the IP Address

2. The system automatically generates the MAC address, System Name, TFTP Server IP Address and Image File

Name of the device.

3.1.3.1 Assigning the IP Address Manually

1. Select the IP Address Type as Static and enter the appropriate IP Address, Subnet Mask, and the Gateway IP

Address parameters.

2. Enter the SNMP Read/Write password in the Read/Write Password field. By default, it is public.

3. Click OK to save the changes.

4. Click Rescan to verify the changes applied.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 177 178

Brak uwag

Proxim ORiNOCO Przewodnik Instalacji Strona 17