Proxim ORiNOCO Przewodnik Instalacji Pobierz pdf (Strona 48)

Device Configuration

ORiNOCO® 802.11n Access Points - Software Management Guide 48

Click OK and COMMIT, to save the configured parameters.

• To configure VLAN on the AP device, the global VLAN status should be enabled.

• ‘Fragmentation Threshold’ and ‘Multicast Rate’, roll back to their default values when the Operational Mode of

the radio is changed.

• We recommend you to connect the AP Device to a maximum of 35 to 40 clients simultaneously, for a better

performance and higher throughputs.

B. Wireless Distribution System (WDS)

A Wireless Distribution System (WDS) helps you to establish a wireless link between two BSS and allows the clients of one

BSS network to communicate with the clients of other BSS network. WDS helps in extending the WLAN, where it is difficult to

use the wired ethernet to relay the packets between the networks.

Following figure and example illustrate the work process of WDS:

Max Stations This parameter allows you to restrict the maximum number of wireless clients that can be

associated with each VAP. A maximum of 128 wireless clients can be connected per radio.

By default, the Max Stations value taken for each VAP is 64. To configure, enter a value

ranging from 1 to 128.

: A VAP (already connected to the maximum number of wireless clients) responds to a

probe request from a new client, with a probe response. But it responds to the

authentication request, with a proper error code, specifying the Max Stations limit.

Number of Clients per Radio

If ‘n’ is the number of VAPs enabled on a radio, then tabulated below are the number of

clients supported per radio, in security mode.

* Maximum number of clients per Radio.

* The maximum of clients supported per VAP in an open authentication mode is 127.

Security Mode Maximum Number

of Clients*

Example: If no. of VAP(s) ‘n=1’,

then Maximum Number of Clients*

WEP 127 127

PSK + TKIP (62 - n) (62 - 1) = 61

PSK + AES (124 - n) (124 - 1) = 123

PSK + TKIP + AES (62 - n) (62 - n) = 61

Dot1x + WEP (124 - n) (124 - 1) = 123

Dot1x + TKIP (62 - n) (62 - 1) = 61

Dot1x + AES (124 - n) (124 - 1) = 123

Dot1x + TKIP + AES (62 - n) (62 - n) = 61

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 177 178

Brak uwag

Proxim ORiNOCO Przewodnik Instalacji Strona 48